Convert, Compare or Review
|
TCKTOTC1.cbl Convert, Compare or Review |
|
| The SimoTime Home Page |
Introduction
This document shows the content of a COBOL Source Member.
We have made a significant effort to ensure the documents and software technologies are correct and accurate. We reserve the right to make changes without notice at any time. The function delivered in this version is based upon the enhancement requests from a specific group of users. The intent is to provide changes as the need arises and in a timeframe that is dependent upon the availability of resources.
Copyright © 1987-2023
SimoTime Technologies and Services
All Rights Reserved
COBOL Source Code
The following is a COBOL Source Member that will process a file containing text strings that use EBCDIC or ASCII encoding and numeric values that may be stored in a Binary, Packed-Decimal or Zoned-Decimal format.
IDENTIFICATION DIVISION.
PROGRAM-ID. TCKTOTC1.
AUTHOR. SIMOTIME TECHNOLOGIES.
*****************************************************************
* This program was generated by SimoZAPS *
* A product of SimoTime Technologies *
* Our e-mail address is: helpdesk@simotime.com *
* Also, visit our Web Site at http://www.simotime.com *
* *
* Generation Date: 2023-03-03 Generation Time: 23:07:16:99 *
* *
* Record Record Key *
* Function Name Organization Format Max-Min Pos-Len *
* PRIMARY SYSUT1 SEQUENTIAL FIXED 00512 *
* *
*****************************************************************
ENVIRONMENT DIVISION.
INPUT-OUTPUT SECTION.
FILE-CONTROL.
SELECT SYSUT1-FILE ASSIGN TO SYSUT1
ORGANIZATION IS SEQUENTIAL
ACCESS MODE IS SEQUENTIAL
FILE STATUS IS SYSUT1-STATUS.
*****************************************************************
DATA DIVISION.
FILE SECTION.
FD SYSUT1-FILE
DATA RECORD IS SYSUT1-REC
.
01 SYSUT1-REC.
05 SYSUT1-DATA-01 PIC X(00512).
*****************************************************************
* This set of programs will create summary totals for *
* pre-defined user-fields. The SYSNTOT1.TXT template file was *
* used to create this program. This program has the option to *
* process packed fields with non-numeric values or all space *
* characters. The fields with invalid characters or all spacces *
* are set to a zero value prior to being used to calculate the *
* summary totals. The input file is NOT updated. *
* *
* If Packed fields (i.e. COMP-3) are used and the packed fields *
* contain SPACE characters this program may ABEND with a *
* Mainframe S0C7 error or a Micro Focus 163 Error. *
* *
* On the Mainframe System the NUMPROC(NOPFD) Compiler option *
* may be used to avoid the S0C7 ABEND. *
* *
* In the Micro Focus environment the SIGNFIXUP Compiler *
* directive may be used in conjunction with not using the *
* CHECKNUM Compiler directive. *
* *
* Note: the process that causes the packed fields to contain *
* SPACE characters should be addressed. The Compiler options *
* only prevent the error message but may produce in incorrect *
* results when used in arithmetic processing. *
* *
* The End-of-Job processing will post the summary totals and *
* record count information to the SYSOUT device. *
* *
* For more information or questions please contact SimoTime *
* Technologies. The version control number is 21.04.01 *
* *
* Our e-mail address is: helpdesk@simotime.com *
* Also, visit our Web Site at http://www.simotime.com *
* *
*****************************************************************
WORKING-STORAGE SECTION.
01 SIM-TITLE.
05 T1 pic X(11) value '* TCKTOTC1 '.
05 T2 pic X(34) value 'Accumulate Summary Totals for RSEQ'.
05 T3 pic X(10) value ' v22.01.01'.
05 T4 pic X(24) value ' helpdesk@simotime.com'.
01 SIM-COPYRIGHT.
05 C1 pic X(11) value '* TCKTOTC1 '.
05 C2 pic X(32) value 'A Program to Calculate Totals wa'.
05 C3 pic X(32) value 's generated by SimoTime Technolo'.
05 C4 pic X(04) value 'gies'.
01 SIM-THANKS-01.
05 C1 pic X(11) value '* TCKTOTC1 '.
05 C2 pic X(32) value 'Program to Calculate Totals gene'.
05 C3 pic X(32) value 'rated by using SimoTime Technolo'.
05 C4 pic X(04) value 'gies'.
01 SIM-THANKS-02.
05 C1 pic X(11) value '* TCKTOTC1 '.
05 C2 pic X(32) value 'Please send all comments or sugg'.
05 C3 pic X(32) value 'estions to the helpdesk@simotime'.
05 C4 pic X(04) value '.com'.
01 SYSUT1-STATUS.
05 SYSUT1-STATUS-L pic X.
05 SYSUT1-STATUS-R pic X.
01 SYSUT1-EOF pic X value 'N'.
01 SYSUT1-OPEN-FLAG pic X value 'C'.
01 SYSUT2-STATUS.
05 SYSUT2-STATUS-L pic X.
05 SYSUT2-STATUS-R pic X.
01 SYSUT2-EOF pic X value 'N'.
01 SYSUT2-OPEN-FLAG pic X value 'C'.
*****************************************************************
* The following buffers are used to create a four-byte status *
* code that may be displayed. *
*****************************************************************
01 IO-STATUS.
05 IO-STAT1 pic X.
05 IO-STAT2 pic X.
01 IO-STATUS-04.
05 IO-STATUS-0401 pic 9 value 0.
05 IO-STATUS-0403 pic 999 value 0.
01 TWO-BYTES-BINARY pic 9(4) BINARY.
01 TWO-BYTES-ALPHA redefines TWO-BYTES-BINARY.
05 TWO-BYTES-LEFT pic X.
05 TWO-BYTES-RIGHT pic X.
*****************************************************************
* Message Buffer used by the Z-DISPLAY-MESSAGE-TEXT routine. *
*****************************************************************
01 MESSAGE-BUFFER.
05 MESSAGE-HEADER pic X(011) value '* TCKTOTC1 '.
05 MESSAGE-TEXT.
10 MESSAGE-TEXT-1 pic X(068) value SPACES.
10 MESSAGE-TEXT-2 pic X(188) value SPACES.
01 MSG-LSB pic 9(5) value 267.
*****************************************************************
01 APPL-RESULT pic S9(9) comp.
88 APPL-AOK value 0.
88 APPL-EOF value 16.
01 HEX20-PARM pic X(16) value 'HEX20_TAG '.
01 HEX40-PARM pic X(16) value 'HEX40_TAG '.
01 HEXTR-PARM pic X(16) value 'ENABLE '.
01 NUMCHK-PARM pic X(16) value 'NUMCHK_TAG '.
01 USER-RETURN-CODE pic 9(4) value 0.
01 SYSUT1-LRECL pic 9(5) value 00512.
01 LEN-1 pic 9(5) value 128.
01 POS-1 pic 9(5) value 1.
01 SYSUT1-TOTAL.
05 filler pic X(25) value 'Record count for SYSUT1 '.
05 filler pic X(20) value SPACES.
05 SYSUT1-RDR pic 9(9) value 0.
01 FORMAT-TYPE pic X value 'B'.
01 PT-1 pic 999 value 0.
01 PT-2 pic 999 value 0.
01 PT-3 pic 999 value 0.
01 WORK-32 pic X(32) value SPACES.
01 DECIMAL-CHR pic X value '.'.
COPY PANTOTB1.
COPY TCKSDSB1.
*****************************************************************
PROCEDURE DIVISION.
perform JOB-STARTING
perform until SYSUT1-STATUS not = '00'
perform SYSUT1-READ
move SYSUT1-REC to TCKSDS01-RECORD
if SYSUT1-STATUS = '00'
add SYSUT1-RDR to ZERO giving PA-NTOT-RRN
call 'TCKTOTR1' using PA-NTOT-GROUP
TCKSDS01-RECORD
end-if
end-perform
perform JOB-FINISHED
if RETURN-CODE = 0
add USER-RETURN-CODE to ZERO giving RETURN-CODE
end-if
GOBACK.
*****************************************************************
JOB-FINISHED.
perform SYSUT1-CLOSE
move all '*' to MESSAGE-TEXT(1:108)
perform Z-DISPLAY-MESSAGE-TEXT
move 'Field Name' to MESSAGE-TEXT
move 'Summary.Total' to MESSAGE-TEXT(48:13)
move ' HEX40' to MESSAGE-TEXT(75:7)
move ' HEX20' to MESSAGE-TEXT(85:7)
move ' NUMCHK' to MESSAGE-TEXT(95:7)
move 'TYPE' to MESSAGE-TEXT(103:4)
perform Z-DISPLAY-MESSAGE-TEXT
if PA-NTOT-HOT > ZERO
add 1 to ZERO giving PA-NTOT-IDX
perform until PA-NTOT-IDX > PA-NTOT-HOT
move ZERO to PT-1
move ZERO to PT-2
move ZERO to PT-3
move PA-NTOT-NUMB(PA-NTOT-IDX) to WORK-32
perform varying PT-1 from 1 by 1 until PT-1 > 31
if WORK-32(PT-1:1) = DECIMAL-CHR
add PT-1 to ZERO giving PT-2
end-if
if WORK-32(PT-1:1) = 0
or WORK-32(PT-1:1) > 0
and WORK-32(PT-1:1) < 9
or WORK-32(PT-1:1) = 9
add PT-1 to ZERO giving PT-3
end-if
end-perform
if PT-2 > 0
and PT-3 > PT-2
compute PT-1 = 56 - PT-3 + (PT-3 - PT-2)
else
if PT-3 > 0
compute PT-1 = 55 - PT-3
else
add 37 to ZERO giving PT-1
end-if
end-if
move PA-NTOT-DESC(PA-NTOT-IDX) to MESSAGE-TEXT
move PA-NTOT-NUMB(PA-NTOT-IDX) to MESSAGE-TEXT(PT-1:32)
if PA-HEX40-CTR(PA-NTOT-IDX) > 0
move PA-HEX40-CTR(PA-NTOT-IDX)
to MESSAGE-TEXT(75:7)
add 4 to ZERO giving USER-RETURN-CODE
end-if
if PA-HEX20-CTR(PA-NTOT-IDX) > 0
move PA-HEX20-CTR(PA-NTOT-IDX)
to MESSAGE-TEXT(85:7)
add 4 to ZERO giving USER-RETURN-CODE
end-if
if PA-NUMCHK-CTR(PA-NTOT-IDX) > 0
move PA-NUMCHK-CTR(PA-NTOT-IDX)
to MESSAGE-TEXT(95:7)
add 4 to ZERO giving USER-RETURN-CODE
end-if
if PA-NTOT-TYPE(PA-NTOT-IDX) not = SPACES
move PA-NTOT-TYPE(PA-NTOT-IDX)
to MESSAGE-TEXT(103:2)
end-if
move PA-NTOT-SIGN(PA-NTOT-IDX) to MESSAGE-TEXT(105:3)
perform Z-DISPLAY-MESSAGE-TEXT
add 1 to PA-NTOT-IDX
end-perform
end-if
move SYSUT1-TOTAL to MESSAGE-TEXT
perform Z-DISPLAY-MESSAGE-TEXT
move 'Field Name' to MESSAGE-TEXT
move 'Summary.Total' to MESSAGE-TEXT(48:13)
move ' HEX40' to MESSAGE-TEXT(75:7)
move ' HEX20' to MESSAGE-TEXT(85:7)
move ' NUMCHK' to MESSAGE-TEXT(95:7)
move 'TYPE' to MESSAGE-TEXT(103:4)
perform Z-DISPLAY-MESSAGE-TEXT
move all '*' to MESSAGE-TEXT(1:108)
perform Z-DISPLAY-MESSAGE-TEXT
perform Z-THANK-YOU.
exit.
*****************************************************************
JOB-STARTING.
perform Z-POST-COPYRIGHT
perform Z-DETERMINE-ENVIRONMENT
initialize PA-NTOT-GROUP
add 256 to ZERO giving PA-NTOT-LTD
perform SYSUT1-OPEN
exit.
*****************************************************************
* I/O Routines for the Primary File... *
*****************************************************************
SYSUT1-CLOSE.
add 8 to ZERO giving APPL-RESULT.
close SYSUT1-FILE
if SYSUT1-STATUS = '00'
subtract APPL-RESULT from APPL-RESULT
else
add 12 to ZERO giving APPL-RESULT
end-if
if APPL-AOK
CONTINUE
else
move 'CLOSE Failure with SYSUT1 ' to MESSAGE-TEXT
perform Z-DISPLAY-MESSAGE-TEXT
move SYSUT1-STATUS to IO-STATUS
perform Z-DISPLAY-IO-STATUS
perform Z-ABEND-PROGRAM
end-if
exit.
*---------------------------------------------------------------*
SYSUT1-READ.
read SYSUT1-FILE
if SYSUT1-STATUS = '00'
subtract APPL-RESULT from APPL-RESULT
add 1 to SYSUT1-RDR
else
if SYSUT1-STATUS = '10'
add 16 to ZERO giving APPL-RESULT
else
add 12 to ZERO giving APPL-RESULT
end-if
end-if
if APPL-AOK
CONTINUE
else
if APPL-EOF
move 'Y' to SYSUT1-EOF
else
move 'READ Failure with SYSUT1 ' to MESSAGE-TEXT
perform Z-DISPLAY-MESSAGE-TEXT
move SYSUT1-STATUS to IO-STATUS
perform Z-DISPLAY-IO-STATUS
perform Z-ABEND-PROGRAM
end-if
end-if
exit.
*---------------------------------------------------------------*
SYSUT1-OPEN.
add 8 to ZERO giving APPL-RESULT.
open input SYSUT1-FILE
if SYSUT1-STATUS = '00'
subtract APPL-RESULT from APPL-RESULT
move 'O' to SYSUT1-OPEN-FLAG
else
add 12 to ZERO giving APPL-RESULT
end-if
if APPL-AOK
CONTINUE
else
move 'OPEN Failure with SYSUT1 ' to MESSAGE-TEXT
perform Z-DISPLAY-TO-CONSOLE
perform Z-DISPLAY-MESSAGE-TEXT
move SYSUT1-STATUS to IO-STATUS
perform Z-DISPLAY-IO-STATUS
perform Z-ABEND-PROGRAM
end-if
exit.
*****************************************************************
* The following Z-ROUTINES provide administrative functions *
* for this program. *
*****************************************************************
* ABEND the program, post a message to the console and issue *
* a STOP RUN. *
*****************************************************************
Z-ABEND-PROGRAM.
if MESSAGE-TEXT not = SPACES
perform Z-DISPLAY-MESSAGE-TEXT
end-if
move 'PROGRAM-IS-ABENDING...' to MESSAGE-TEXT
perform Z-DISPLAY-MESSAGE-TEXT
add 12 to ZERO giving RETURN-CODE
STOP RUN.
* exit.
*****************************************************************
Z-DETERMINE-ENVIRONMENT.
move '* HEX20 parameter is ' to MESSAGE-TEXT
move HEX20-PARM to MESSAGE-TEXT(23:16)
perform Z-DISPLAY-MESSAGE-TEXT
move '* HEX40 parameter is ' to MESSAGE-TEXT
move HEX40-PARM to MESSAGE-TEXT(23:16)
perform Z-DISPLAY-MESSAGE-TEXT
move '* HEXTR parameter is ' to MESSAGE-TEXT
move HEXTR-PARM to MESSAGE-TEXT(23:16)
perform Z-DISPLAY-MESSAGE-TEXT
move '* NUMCHK parameter is ' to MESSAGE-TEXT
move NUMCHK-PARM to MESSAGE-TEXT(23:16)
perform Z-DISPLAY-MESSAGE-TEXT
exit.
*****************************************************************
Z-CALCULATE-MESSAGE-LSB.
add 267 to ZERO giving MSG-LSB
perform until MSG-LSB < 80
or MESSAGE-BUFFER(MSG-LSB:1) not = SPACE
if MESSAGE-BUFFER(MSG-LSB:1) = SPACE
subtract 1 from MSG-LSB
end-if
end-perform
exit.
*****************************************************************
* Display to SYSOUT Device... *
*****************************************************************
Z-DISPLAY-MESSAGE-TEXT.
perform Z-CALCULATE-MESSAGE-LSB
display MESSAGE-BUFFER(1:MSG-LSB)
move all SPACES to MESSAGE-TEXT
exit.
*****************************************************************
* Display CONSOLE messages... *
*****************************************************************
Z-DISPLAY-TO-CONSOLE.
perform Z-CALCULATE-MESSAGE-LSB
display MESSAGE-BUFFER(1:MSG-LSB) upon console
exit.
*****************************************************************
* Display the file status bytes. This routine will display as *
* four digits. If the full two byte file status is numeric it *
* will display as 00nn. If the 1st byte is a numeric nine (9) *
* the second byte will be treated as a binary number and will *
* display as 9nnn. *
*****************************************************************
Z-DISPLAY-IO-STATUS.
if IO-STATUS not NUMERIC
or IO-STAT1 = '9'
move IO-STAT1 to IO-STATUS-04(1:1)
subtract TWO-BYTES-BINARY from TWO-BYTES-BINARY
move IO-STAT2 to TWO-BYTES-RIGHT
add TWO-BYTES-BINARY to ZERO giving IO-STATUS-0403
move 'File Status is: nnnn' to MESSAGE-TEXT
move IO-STATUS-04 to MESSAGE-TEXT(17:4)
perform Z-DISPLAY-TO-CONSOLE
perform Z-DISPLAY-MESSAGE-TEXT
else
move '0000' to IO-STATUS-04
move IO-STATUS to IO-STATUS-04(3:2)
move 'File Status is: nnnn' to MESSAGE-TEXT
move IO-STATUS-04 to MESSAGE-TEXT(17:4)
perform Z-DISPLAY-TO-CONSOLE
perform Z-DISPLAY-MESSAGE-TEXT
end-if
exit.
*****************************************************************
Z-POST-COPYRIGHT.
move SIM-TITLE to MESSAGE-BUFFER
perform Z-DISPLAY-MESSAGE-TEXT
move SIM-COPYRIGHT to MESSAGE-BUFFER
perform Z-DISPLAY-MESSAGE-TEXT
exit.
*****************************************************************
Z-THANK-YOU.
move SIM-THANKS-01 to MESSAGE-BUFFER
perform Z-DISPLAY-MESSAGE-TEXT
move SIM-THANKS-02 to MESSAGE-BUFFER
perform Z-DISPLAY-MESSAGE-TEXT
exit.
*****************************************************************
* This program was generated by SimoZAPS *
* A product of SimoTime Technologies *
* Our e-mail address is: helpdesk@simotime.com *
* Also, visit our Web Site at http://www.simotime.com *
* *
* Generation Date: 2023-03-03 Generation Time: 23:07:17:01 *
*****************************************************************
Summary
This document shows the content of a COBOL Source Member. This document may be used to assist as a tutorial for new programmers or as a quick reference for experienced programmers.
In the world of programming there are many ways to solve a problem. This documentation and software were developed and tested on systems that are configured for a SIMOTIME environment based on the hardware, operating systems, user requirements and security requirements. Therefore, adjustments may be needed to execute the jobs and programs when transferred to a system of a different architecture or configuration.
SIMOTIME Services has experience in moving or sharing data or application processing across a variety of systems. For additional information about SIMOTIME Services or Technologies please contact us using the information in the Contact, Comment or Feedback section of this document.
Software Agreement and Disclaimer
Permission to use, copy, modify and distribute this software, documentation or training material for any purpose requires a fee to be paid to SimoTime Technologies. Once the fee is received by SimoTime the latest version of the software, documentation or training material will be delivered and a license will be granted for use within an enterprise, provided the SimoTime copyright notice appear on all copies of the software. The SimoTime name or Logo may not be used in any advertising or publicity pertaining to the use of the software without the written permission of SimoTime Technologies.
SimoTime Technologies makes no warranty or representations about the suitability of the software, documentation or learning material for any purpose. It is provided "AS IS" without any expressed or implied warranty, including the implied warranties of merchantability, fitness for a particular purpose and non-infringement. SimoTime Technologies shall not be liable for any direct, indirect, special or consequential damages resulting from the loss of use, data or projects, whether in an action of contract or tort, arising out of or in connection with the use or performance of this software, documentation or training material.
Downloads and Links
This section includes links to documents with additional information that are beyond the scope and purpose of this document. The first group of documents may be available from a local system or via an Internet connection, the second group of documents will require an Internet connection.
Note: A SIMOTIME License is required for the items to be made available on a local system or server.
Current Server or Internet Access
The following links may be to the current server or to the Internet.
Note: The latest versions of the SimoTime Documents and Program Suites are available on the Internet and may be accessed using the 
icon. If a user has a SimoTime Enterprise License the Documents and Program Suites may be available on a local server and accessed using the 
icon.
Explore An Enterprise System Model that describes and demonstrates how Applications that were running on a Mainframe System and non-relational data that was located on the Mainframe System were copied and deployed in a Microsoft Windows environment with Micro Focus Enterprise Server.
Explore The Binary or COMP format for numeric data strings. This numeric structure is supported by COBOL and may be explicitly defined with the "USAGE IS COMP" or "USAGE IS BINARY" clause.
Explore The Packed-Decimal or COMP-3 format for numeric data strings. This numeric structure is supported by COBOL and may be explicitly defined with the "USAGE IS COMP-3" clause.
Explore The Zoned-Decimal format for numeric data strings. This numeric structure is the default numeric for COBOL and may be explicitly defined with the "USAGE IS DISPLAY" clause.
Explore How to Generate a Data File Convert Program using simple specification statements in a Process Control File (PCF). This link to the User Guide includes the information necessary to create a Process Control File and generate the COBOL programs that will do the actual data file conversion. The User Guide contains a list of the PCF statements that are used for the data file convert process.
Explore How to Generate a Data File Compare, Validate or Hex-Dump Program using simple specification statements in a Process Control File (PCF). This link to the User Guide includes the information necessary to create a Process Control File and generate the COBOL programs that will do a data file compare, accumulate summary totals with a record count or produce a Hex-Dump of records in a VSAM, KSDS based on a list of user-defined keys. The User Guide contains a list of the PCF statements that are used for the data file compare, validate or dump process.
Explore the COBOL Connection for more examples of COBOL programming techniques and sample code.
Explore The ASCII and EBCDIC Translation Tables. These tables are provided for individuals that need to better understand the bit structures and differences of the encoding formats.
Explore The File Status Return Codes to interpret the results of accessing VSAM data sets and/or QSAM files.
Internet Access Required
The following links will require an Internet connection.
A good place to start is The SimoTime Home Page for access to white papers, program examples and product information. This link requires an Internet Connection
Explore The Micro Focus Web Site for more information about products (including Micro Focus COBOL) and services available from Micro Focus. This link requires an Internet Connection.
Explore the GnuCOBOL Technologies available from SourceForge. SourceForge is an Open Source community resource dedicated to helping open source projects be as successful as possible. GnuCOBOL (formerly OpenCOBOL) is a COBOL compiler with run time support. The compiler (cobc) translates COBOL source to executable using intermediate C, designated C compiler and linker. This link will require an Internet Connection.
Glossary of Terms
Explore the Glossary of Terms for a list of terms and definitions used in this suite of documents and white papers.
Contact, Comments or Feedback
This document was created and is maintained by SimoTime Technologies and Services. If you have any questions, suggestions, comments or feedback please use the following contact information.
| 1. | Send an e-mail to our helpdesk. |
| 1.1. | helpdesk@simotime.com. |
| 2. | Our telephone numbers are as follows. |
| 2.1. | 1 415 763-9430 office-helpdesk |
| 2.2. | 1 415 827-7045 mobile |
We appreciate hearing from you.
Company Overview
SimoTime Technologies was founded in 1987 and is a privately owned company. We specialize in the creation and deployment of business applications using new or existing technologies and services. We have a team of individuals that understand the broad range of technologies being used in today's environments. Our customers include small businesses using Internet technologies to corporations using very large mainframe systems.
Quite often, to reach larger markets or provide a higher level of service to existing customers it requires the newer Internet technologies to work in a complementary manner with existing corporate mainframe systems. We specialize in preparing applications and the associated data that are currently residing on a single platform to be distributed across a variety of platforms.
Preparing the application programs will require the transfer of source members that will be compiled and deployed on the target platform. The data will need to be transferred between the systems and may need to be converted and validated at various stages within the process. SimoTime has the technology, services and experience to assist in the application and data management tasks involved with doing business in a multi-system environment.
Whether you want to use the Internet to expand into new market segments or as a delivery vehicle for existing business functions simply give us a call or check the web site at http://www.simotime.com
| Return-to-Top |
| TCKTOTC1.cbl - COBOL Source Member |
| Copyright © 1987-2023 SimoTime Technologies and Services All Rights Reserved |
| When technology complements business |
| http://www.simotime.com |